graco magnum prox19
Fine finish spray tips are used for cabinetry, furniture and interior trim work (for a smooth fine finish) example Graco FF LP spray tips: 210 or 310. Low pressure tips are used primarily for spraying with pressures between 55 to 76 bar (800 to 1100 psi).
What is a 211 spray tip used for?
The 211 spray tip is used to work with light lacquers and spray more accurately. For example, to paint beams and window frames. To paint larger surfaces, such as ceilings or tables, it would be more appropriate to use a 411 spray tip with lacquers or paints / interior materials.
What is a 515 spray tip used for?
10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings. The . 015 inch hole size is best choice for spraying interior/exterior paints, primers and enamels.
What is the difference between the Graco x5 and x7?
The major difference between the Graco x5 and x7 is that the x5 has an easy to remove paint nozzle and the x7 has the reverse paint spill feature. Otherwise, they’re both extremely easy to use.
How do you set up a Graco paint sprayer?
Prime the Pump
Engage the trigger lock.Remove the tip and guard from your gun.Place the fluid intake hose into a paint pail and place the drain tube into a waste pail.Be sure the prime valve is in the PRIME, or DRAIN, position.Turn the pressure control to the lowest pressure setting.Turn the on/off switch to ON.
What is a 313 spray tip used for?
6 inch spray pattern ideal for narrow surfaces such as fences, decks and furniture. The . 013 inch hole size optimal for spraying medium materials like solid stains, interior latex or polyurethanes. Less overspray shortens cleanup time with less wasted material.
What is a 417 spray tip used for?
Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 8 inch spray pattern ideal for larger surfaces such as interior or exterior walls.
What is a 411 spray tip used for?
011 inch hole size optimal for spraying thinner materials like semi transparent stains, water sealers, stains or polyurethanes. Less overspray shortens cleanup time with less wasted material.
What is a 213 spray tip used for?
The 213 SwitchTip has a 0.013 inch orifice and produces a 4 to 6 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.
What is the Wagner 311 tip for?
The Wagner 311 Spray Tip outputs a 6-8″ spray pattern to easily spray large projects such as decks, fences, siding and more. It features HEA technology that decreases overspray by up to 55% while delivering softer spray, improving control and providing a more-consistent finish.
What tip should I use to spray cabinets?
When spraying water-based enamel and satin finish paint, it’s best to use a 311 spray tip as it will deliver a 6-inch spray fan that is perfect for cabinets and smaller doors.
What would cause a paint sprayer to not prime?
If this is the issue you experience the most likely cause is that the transducer is worn out. The transducer signals to the airless pump that pressure is needed and signals to run the pump to build pressure. Failure to build pressure often indicates that you need to replace the transducer.
Why is my paint sprayer not spraying?
If your paint gun is not spraying paint at all, it’s most likely due to a clog either in the air vent hole or the hose. Clean any dried paint with a toothpick, and use a cleaning solvent to clear any remaining gunk. If you’ve cleaned your paint gun and find that it still isn’t spraying, take a look at the air supply.
