my leviton
Make sure you have the latest version of the My Leviton App. To ensure that you are running the latest version of the app, check for a My Leviton app update on the Apple App store or Google Play store. If available, try using a different mobile phone or tablet running the My Leviton app.
How do I set up my Leviton app?
– Locate and open the Leviton “Decora Digital Dimmer & Timer” app on your smart device. – Select the “+” sign at the top right corner to add your Decora Digital device. – Follow the on-screen instructions to pair your smart device: – Hold the OFF button on your Decora Digital device until its status LED blinks.
Why is my smart light switch not working?
The reason that most of the smart switches won’t work in this configuration is that the switch is breaking the circuit when it is off so power is not flowing through the switch. Smart switches require a source of power because they are always communicating with a hub or with a phone.
How do you reset a Leviton light switch?
Leviton decora smart switch reset
Hold the top of the paddle for 7 seconds. After 7 seconds the Locator LED will blink amber.Release the top of the paddle and the switch will reset.Once the switch has reset the Locator LED will blink green.
How do I connect my Smart switch to wifi?
Reconnecting a smart switch usually consists of three steps:
Put your smart switch into discovery mode.Connect your mobile device to the smart switch.Connect your smart switch to your wireless internet via the mobile device.
Is my Leviton app free?
Use the free My Leviton iOS app to add/name your smart devices and to control them individually or as a room with a single button push.
Can I use my phone to operate a light Leviton switch?
Control your lights and loads from anywhere using the free My Leviton app for iPhone, iPad or iPod Touch. Easily replace your existing single pole or multi-way devices with the new Leviton Dimmer or Switches to allow control from anywhere via your My Leviton app.
How do I pair my Leviton Z wave switch?
Follow directions in the Z-Wave® controller to enter learn mode. Tap the top of the paddle one time. The Locator LED will quickly flash green. The Z-Wave® controller will begin to pair with the Decora SmartTM device.
Why is my Leviton dimmer switch not working?
In these instances, you need to power cycle the device. If it is a dimmer (DH6HD or DH1KD), simply lift the bottom of the dim/bright bar until either the light or LED at the bottom of the dimmer turns off. Wait 5 seconds and then push the dim/bright bar back in, the dimmer will restart.
How do you reset a Leviton Z Wave dimmer switch?
Hold the the top of the paddle for a total of 14 seconds. After the first 7 seconds the LED turns amber. The Locator LED will quickly flash red/amber after 14 seconds. Release the the top of the paddle and the device will reset.
How do you reset a light switch?
Delete the Wall Switch from the iDevices app: For iOS: Tap on the Wall Switch, tap the product name in the upper left-hand corner, scroll down and tap “Delete.” For Android: Tap on the Wall Switch, tap the 3 dots, tap “Edit Product,” scroll down and tap “Delete Product.”
Why is my smart switch offline?
Smart Life devices go offline due to overloads in your router when your router renews the LAN/WAN IP address, or if there are errors stored in its cache. Solutions to this problem include clearing the cache or using a dedicated 2.4g WiFi router for Smart Life devices.
